日本岩崎IWATSU 高压探头HV-P60 HV-P30

日本岩崎IWATSU 高压探头HV-P60 HV-P30

长沙泰克示波器 长沙泰克电源 长沙力科示波器 长沙力科电源 长沙安捷伦示波器 长沙力科电源 长沙安捷伦示波器 长沙安捷伦电源 长沙福禄克万用表 湖南福禄克万用表  高压探头 电流探头  湖南泰克示波器 湖南泰克电源  湖南力科示波器  湖南力科电源  湖南安捷伦示波器  湖南力科电源  湖南安捷伦示波器  湖南安捷伦电源  高压探头 电流探头

一、产品简介
能够测量60KV/30KV 的高压探头


二、产品特点及详细参数

HV-P60
  HV-P60 
  High-voltage waveforms of up to DC 60 kV, pulse 80 kV measured by oscilloscope
 
  
 Wide bandwidth, DC to 50 MHz
 
  
 Maintenance-free, due to use of silicon rubber - guarantees stable withstand voltage
 
 Specifications 
Maximum input voltage DC 60 kV or AC peak*
Single-shot pulse of 80 kV, standard pulse wave 
Bandwidth DC to 50 MHz, within -3 dB 
Rise time 7 ns or less (for probes only) 
Input RC 1000 MW ±5% //5 pF ±2 pF 
Attenuation 2000:1 ±5% 
Cable length Approx. 4 m 
Connector BNC type 
Used for Oscilloscope with input RC: 1 MW, 15 to 50 pF 
Size Approx. 88 mm (?) x 338 mm (L) 
Weight Approx. 3.5 kg (including accessories) 
Accessories Matching box, clamp, probe tip, ground lead, adjusting screwdriver, accessory bag 
Options
 High-voltage probe stand SK-301 (produced upon order)
The SK-301 can be used with both the HV-P60 and the HV-P30. It is attached by turning the probe bracket upside down (for HV-P60/HV-P30). 
* The P-P voltage drops if the CW is 100 kHz or greater.
 
 
 This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 60 kV, and the attenuation is 2000:1. 
 Characteristic curve 
 
Maximum Input Voltage and Frequency (Sine Wave) [HV-P60]
 
 
HV-P30
 
HV-P30
High-voltage probe stand SK-301 (sold separately) 
  High-voltage waveforms of up to DC 30 kV, pulse 40 kV measured by oscilloscope
 
  
 Wide bandwidth, DC to 50 MHz
 
  
 Maintenance-free, due to use of silicon rubber - guarantees stable withstand voltage
 
 Specifications 
Maximum input voltage DC 30 kV or DC + AC peak*
Single-shot pulse of 40 kV, repetitive ** 
Bandwidth DC to 50 MHz, within -3dB 
Rise time 7 ns or less (for probes only) 
Input RC  100 MW ±5% //7 pF or less 
Attenuation 1000:1 ±5% 
Cable length Approx. 3 m 
Connector BNC type 
Used for Oscilloscope with input RC: 1 MW, 15 to 50 pF 
Size Approx. 66 mm (?) x 315 mm (L) 
Weight Approx. 3 kg (including accessories) 
Accessories Matching box, clamp, probe tip, ground lead, adjusting screwdriver, accessory bag 
Options High-voltage probe stand SK-301 (produced upon order)
The SK-301 can be used with both the HV-P60 and the HV-P30. It is attached by turning the probe bracket upside down (for HV-P60/HV-P30). 
* The P-P voltage drops if the CW is 100 kHz or greater.
 
 
 This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 30 kV, and the attenuation is 1000:1. 
 Characteristic curve 
 
Maximum Input Voltage and Frequency (Sine Wave) [HV-P30]